Why Most Billboards Fail: Common Outdoor Advertising Mistakes

  • Home
  • Blogs
  • Why Most Billboards Fail: Common Outdoor Advertising Mistakes
Why Most Billboards Fail Common Outdoor Advertising Mistakes

Why Most Billboards Fail: Common Outdoor Advertising Mistakes

Table of Contents

Most billboards do not succeed due to a simple reason: they require people to read too much in a short span of time from a location that is not appropriate for their target audience. A driver has only a few seconds to notice the advertisement, which makes every word, color choice, and placement decision crucial. 

This guide provides an overview of the main outdoor advertising mistakes and how to avoid them at the same time. If you want to use Billboards & flex printing services in Dubai for a product launch or a long-term brand campaign, these tips will do your job.

Key takeaways

  1. A billboard message needs to be very clear and stick to the bare necessities within a few seconds.
  2. As well as design, placement is also important – consider traffic speed, sightlines, and audience habits.
  3. Your board is visible and attractive throughout your campaign through lighting and materials that are durable.
  4. Look for a company with experience providing design, print, installation, and maintenance services.

What makes a billboard fail in the first place?

A billboard has one job: deliver a message clearly to someone who is moving and distracted. It doesn’t allow the viewer to go back later or scroll through or read the content, unlike a website or magazine. If it takes longer than 3-4 seconds to comprehend a message, it will probably not be received.

This is often overlooked by many advertisers. They build the board for the client’s team who are already familiar with the brand, but not for someone driving by at 80 km. The result is a board that looks impressive in the design file but performs poorly on the road.

Therefore, design, placement, lighting and materials, and print quality are the four areas of failure that occur in a failure. Each one is discussed below, and there are some simple solutions that you can implement before you order the next one.

How does poor design reduce billboard impact?

Viewers will get the message in a flash or not, depending on the design. The most successful board will be a well-aimed but poorly designed one if it demands too much of the viewer’s attention.

  • Too much text on one board

The biggest design mistake is trying to include everything all on one. Founders want to mention services, include a telephone, have a website, a few offers, and show a logo on a single panel. The viewer is confronted with a wall of words and has no idea what it is.

Instead, try to keep the board to one main message, one supporting line, and one clear call to action. Generally, a phone number or a short web address suffices. If there’s more than that, then that’s a landing page or a follow-up email campaign.

  • Weak or unclear headlines

Your headline should be clear to read in less than 3 seconds and tell an audience what you provide them. The term “Quality You Can Trust” or “Your Partner for Success” is ambiguous and doesn’t provide any specific information to the viewer. Good headlines will state the benefit or the product, such as “Same-Day Signage Repairs” or “Premium LED Signs for Dubai Retail”.

Try reading your headline from a distance of approximately 20 metres. If it requires some stopping and thinking, cut it short.

  • Fonts and colors that are hard to read

Elegant fonts, fancy lettering, and low-contrast color combinations are beautiful on a laptop screen, but will look terrible outside. Fine lines seem a bit hazy at highway distance, and light colors can get washed out in bright sunlight.

Additionally, use large, bold, sans-serif lettering that is spaced between letters. High-contrast combinations: dark blue on white or white on deep red. Use the same colors for your brand, but ensure that the text is always clearly the most prominent part of the board.

Why does bad placement waste your budget?

Even if a billboard has a great design, it is a costly error if it is put in the wrong place. The number of people who see the board, the amount of time they spend on the board, and whether they can read the board safely depends on placement.

  • Ignoring traffic speed and sightlines

People in fast-moving traffic have very little time to read. The text information on a board on a very high-speed highway must be larger than that on a road with slower traffic. Identify if the board is visible from the direction traffic comes from, and if trees, signs, or buildings obstruct the view at crucial locations.

Go to the site beforehand at times when your audience is present before committing. Observe the length of the board and whether drivers can read the board comfortably.

  • Choosing locations without checking audience flow

If a lot of people are on the website, it doesn’t mean that they will be interested in your content. A website on a main highway can get thousands of hits, but if your business is in a residential area or if you have a workforce that’s in an industrial area nearby, that’s a lot of traffic going nowhere.

Match up where you’re located with your customer’s habits. The need for boards may vary by type of clinic or showroom, with residential areas benefiting from placement near residential properties, and commercial corridors requiring boards at showrooms. It isn’t about the biggest audience; it’s about the most relevant.

What lighting and material mistakes hurt visibility??

In some places, outdoor advertising is around-the-clock, and it takes the heat, dust, humidity, and the wind. The visibility and attractiveness of your board will depend on lighting and materials throughout the campaign.

  • Poor illumination after dark

Many campaigns last for weeks, and many more views occur after dark. A poorly lit board is not readable at night and thus reduces the impact by 50% or more. Inappropriate floodlights can also provide glare that will hinder the ability of drivers to see properly, an inefficient and unsafe practice.

If your board is going to be viewed at night, then light the board to begin with! There are a variety of board types that are suitable for various types of LED lighting solutions, including LED backlighting, edge-lit panels, and strategically placed spotlights. Review lighting at night before the launch of the campaign.

  • Cheap materials and weather damage

The low-quality vinyl and thin substrates can fade, sag, or tear in just a few months in the Dubai sun and dust. A worn or ripped board is a bad message to send to a brand without being there. When customers can see the wear, they see that the service has been inadequate and the quality has been below standard.

However, inquire about the materials used, the length of outdoor durability of inks, and corrosion resistance of the frame from your supplier. If you do put in a bit more up front for durable materials, it’s generally cheaper than replacing a board halfway through the campaign.

Why do flex printing quality issues matter?

The most widely used print technique for large format outdoor graphics is flex printing, and a board’s quality can be a deciding factor. A well-designed print will look like a lousy print if it’s not sharp, the colors are inaccurate, or the print material wrinkles when installed.

  • Resolution and color accuracy

Although large boards are seen from afar, sharp edges and accurate colors are still required. When you enlarge old art to the size of a billboard, the text and logos will be pixelated. Another frequent issue is colour mismatch, particularly if a brand’s signature colour changes from a digital proof to a printed panel.

Provide artwork in the proper size and resolution for a board; ask for a color proof before full production. For brands that have specific colour rules, it is important to provide their official colour codes early in the process.

  • Installation and maintenance

Even if you have the best board printed, it could look bad if it is installed incorrectly. From a distance, wrinkles, uneven tensions, and misaligned panels can be seen. After installation, and following the first strong wind, installation teams should check the board.

Determine a maintenance schedule early on. Regularly check, clean, and replace broken boards within a few weeks. If the board is not kept up, it indicates the company does not care about its image. Contacting the best signage company in Dubai will be the smart decision. 

How can brands avoid these outdoor advertising mistakes?

Many billboard problems can be avoided with planning. The table below gives a summary of common mistakes and the corresponding “practical fixes”.

Common Mistake Why It Hurts Results Practical Fix
Too much text Viewers cannot absorb the message in a few seconds Use one headline, one supporting line, and one call to action
Weak headline The offer or benefit is unclear Name a specific product, service, or benefit
Hard-to-read fonts and colors Text disappears in sunlight or at a distance Use bold fonts and high-contrast color pairs
Poor placement Board reaches the wrong audience or is hard to view safely Check traffic speed, sightlines, and audience routines
No night lighting Board loses half its exposure after dark Plan LED or spot lighting before production
Cheap materials Fading and tearing damage brand image Choose UV-resistant materials and sturdy frames
Low-resolution artwork Text and logos look blurry at size Supply artwork at the correct board resolution
No maintenance plan Damaged boards stay up for weeks Schedule regular inspections and cleaning

By pre-launching the checklist, you can prevent the most common outdoor advertising budget busters.

How do you choose the right outdoor signage partner?

Your outside advertising campaign is as useful as the business that creates it, prints it, and hangs it out there. While there are numerous companies looking for the best outdoor signage company in Dubai, the right one depends on the requirements of the business.

  1. Begin by asking about experience with boards like yours. An installation company with experience is familiar with visibility angles, permit requirements, and wind loads. Request to view past work and find out if they’ve collaborated with any brands in your niche. Portfolio reviews are a quick way of judging quality.
  2. Next, evaluate their design and production capabilities. A good partner will provide you with design support, colour proofing, material recommendations, and installation under one roof, drastically minimising delays and miscommunication. Inquire about the person responsible for maintaining the panels after installation, as well as the time required for repairs on damaged panels.
  3. Last but not least, think about the company in the context of your overall brand plan. Many companies seek a partner that can manage billboards, storefront signs, and interior branding all in one to ensure the brand remains consistent throughout. 

A branding and signage companies in Dubai can help you make sure all your outside boards are consistent with your logo, packaging, and in-store signage. Shop around for at least three quotes, ask to see them in writing, and check out the warranty before signing.

Moreover, your Dubai signage projects will find the best signage company when they have the expertise to grasp your audience, your budget, and a track record of satisfying quality in design and installation. With careful selection at this stage, many of the failures mentioned above can be avoided.

Conclusion

Cluttered design, poor billboard placement, poor lighting, cheap materials, and poor print quality are the common reasons for the failure of most billboards. There’s a way to avoid each of these errors with careful planning and the right partner. When preparing to run a new campaign, check out the checklist in this guide, preview your headline from a distance, and double-check your location and lighting plan.

As you start to think about a single roadside board or a multi-location campaign, there is an expert difference that can be felt. Jazeera Advertising offers a complete Billboards & flex printing services in Dubai, including design, proofing, installation, and maintenance. Call the team and get a free quote and make your next outdoor campaign more effective for your brand.

Frequently asked questions

1. What is the most common reason billboards fail?

It is most often due to the attempt to communicate too much. You have seconds to capture their attention, and if the information on your board is too busy or unclear, it’s likely to be overlooked.

2. How long should billboard text be?

Use a maximum of 7 words or fewer on your billboard’s headline. Add one short supporting line and a clear call to action, such as a phone number or web address.

3. Do billboards need lighting to be effective?

Yes, when they are viewed during nighttime hours. LED or spotlight lighting will reduce exposure on unlit boards, so make sure to plan lights prior to production.

4. How often should outdoor boards be maintained?

Regularly check and clean outside boards every couple of weeks. Promptly replace damaged or worn panels to maintain your brand’s professional appearance.

Make a comment

Your email adress will not be published. Required field are marked*